Utility Requirements 460 Volt, 3 Phase, 60HZ  79.9 FLA Materials of Construction:  Tanks: 14 Guage 304 Stainless Steel Canopies: 14 Gauge 304 Stainless Steel Frame Under Tanks: 10 Gauge Carbon Steel Blowoff Construction Stainless Steel Chip Basket Stainless Steel Exterior Plumbing: Stainless Steel, Bronze Drain and Solenoid Valves Interior Plumbing: Stainless Steel Conveyor Frame: 10 Gauge Stainless Steel Conveyor Belt: Stainless Steel Conveyor Rollers: Stainless Steel Product Clearance:  Conveyor Belt 18” Wide by 12” Tall Conveyor Conveyor:  Conveyor Belt 18” Wide by 12” High 3/8” Flat wire heavy duty belt with 1” x 1” mesh Rated load is 25 lbs. per linear foot (higher capacities are available) Take-up Bearings (idler shaft only) Conveyor Drive:  ¾ hp drive is variable speed, rated for 25lbs./linear foot Speed potentiometer on operator panel to control the conveyor speed, 2-12 feet per minute, standard. Conveyor start/stop button on operator control panel E-stops on load and unload sections Solution Tanks:  All welded construction Wash capacity: 130 gallons 3 HP Stainless Pump   Rinse capacity: 130 gallons 3 HP Pump  BlowOff  900 CFM 5 HP Ambient Regenerative  Solution Heating System – Electric  Wash 150 Deg. F. 31.5 KW Rinse 150 Deg. F. 21.9 KW  Solution Recirculation:  Efficient Recirculation System channels 100% of pumped solution through a stainless steel chip/product catch basket, screen water coming off of the shed sheet Weir and baffles for sludge and oil entrapment Stages:  5’ Wash 5’ Rinse 5’ Blow-Off