Stoelting Parts Washer Stainless Steel AquaForce AQF-212 3 Stage

Utility Requirements 460 Volt, 3 Phase, 60HZ  79.9 FLA

Materials of Construction: 
Tanks: 14 Guage 304 Stainless Steel
Canopies: 14 Gauge 304 Stainless Steel
Frame Under Tanks: 10 Gauge Carbon Steel
Blowoff Construction Stainless Steel
Chip Basket Stainless Steel
Exterior Plumbing: Stainless Steel, Bronze Drain and Solenoid Valves
Interior Plumbing: Stainless Steel
Conveyor Frame: 10 Gauge Stainless Steel
Conveyor Belt: Stainless Steel
Conveyor Rollers: Stainless Steel

Product Clearance: 

Conveyor Belt 18” Wide by 12” Tall Conveyor

Conveyor: 

Conveyor Belt 18” Wide by 12” High
3/8” Flat wire heavy duty belt with 1” x 1” mesh
Rated load is 25 lbs. per linear foot (higher capacities are available)
Take-up Bearings (idler shaft only)

Conveyor Drive: 

¾ hp drive is variable speed, rated for 25lbs./linear foot
Speed potentiometer on operator panel to control the conveyor speed, 2-12 feet per minute, standard.
Conveyor start/stop button on operator control panel
E-stops on load and unload sections

Solution Tanks: 

All welded construction
Wash capacity: 130 gallons 3 HP Stainless Pump  
Rinse capacity: 130 gallons 3 HP Pump 
BlowOff  900 CFM 5 HP Ambient Regenerative 

Solution Heating System – Electric 
Wash 150 Deg. F. 31.5 KW
Rinse 150 Deg. F. 21.9 KW 

Solution Recirculation: 
Efficient Recirculation System channels 100% of pumped solution through a stainless steel chip/product catch basket, screen water coming off of the shed sheet
Weir and baffles for sludge and oil entrapment

Stages: 
5’ Wash
5’ Rinse
5’ Blow-Off