Sort By
Select option
2004 Stoelting AQF 230 Pass-Thru Washer | Benchmark Machine Tools
Very Nice Low Hour machine just removed from service. Wash, Rinse, Blow-off Electrically heated 3 stage stainless steel conveyor mesh belt washer with insulated tanks. Washer opening is 32"W x 24"...
2012 MIDBROOK Cyclone Pass-Thru Washer | Benchmark Machine Tools
Just removed from service. Very Good condition (2) Stage Washer Wash Blow-Off Stainless Steel 24" Wide belt 1x1" Mesh, 10" Part Height
2008 ADF 950 Cabinet Washer | Benchmark Machine Tools
Very Nice Large Capacity Stainless Steel Parts Washer Still in Plant Under Power, being removed in early May 2022. Originally Built with two parts carriers, only equipped with one.
50.0psi
Max Pressure
210.0hp
Motor
10000.0lb
Max Load Capacity
808070.0in
Turntable Diameter
Stoelting Omni Force 212 Pass-Thru Washer | Benchmark Machine Tools
Model No. OMF-212 S/N 832 Utility Requirements 460 Volt, 3 Phase, 60HZ Materials of Construction: Tanks: 14 Guage 304 Stainless Steel Canopies: 14 Gauge 304 Stainless Steel Frame Under Tank...
2002 Ransohoff Leanveyor 24 Pass-Thru Washer | Benchmark Machine Tools
Stainless Steel Pass-Thru Parts Washer (3) Stage, Wash with filtration, Rinse, Blow-off Just removed from service Manufactured in 2002
2007 MART Tornado 60 Cabinet Washer | Benchmark Machine Tools
Plant closure, just removed from service in good operating condition. Upgraded with Duplex Pumps
2016 General Fabrications Corporation GFC Four Stage Monorail Monorail | Benchmark Machine Tools
Unit is new unused, on customers floor. Ordered for a contract that fell through. Save over 1/2 of new. Four Stage Stainless Steel Spray Washer Reverse Osmosis System Heated Blow-Off System Encl...
MART Hurricane 6075 Cabinet Washer | Benchmark Machine Tools
Table Diameter 60" Work Height 75 Inches Table Load Capacity 5,000 lbs. Operating Temperature 140-180 Deg. F. Initial Heat Up Time 45-60 Minutes Voltage: 480 3 Phase 60 HZ,
2015 JENFAB LJ-15 Rotary Drum Washer | Benchmark Machine Tools
Moel LJ-15WRD 2 Tanks Wash and Rinse/Inhibit, 140 Deg. F. with 160 Dryer Stainless steel construction of Tanks, Drum Enclosure, Dryer. 30 Inch Washer, 18 Inch Rinse, 48 Inch Dryer
--
Max Pressure
1.0hp
Motor
--
Max Load Capacity
--
Turntable Diameter
2004 RAMCO MKT16EWRD Immersion Parts Washer | Benchmark Machine Tools
RAMCO Multi-Tank System MKT16EWRD 3 Stage, 50 lb. Capacity The MKT16 is a compact console designed to provide a complete aqueous wash/rinse/dry degreasing system with a minimum footprint. The syst...
2004 RAMCO MKQ16WRRD Immersion Parts Washer | Benchmark Machine Tools
RAMCO Multi-Tank System MKQ16WRRD with Ultrasonics From End User
2001 MIDBROOK 5012 W/BO/D Pass-Thru Washer | Benchmark Machine Tools
Midbrook Hurricane Pass Thru Parts Washer Stainless Steel (2) Stage Wash, Blow-Off
JENFAB LEANCLEAN 360-1 Rotary Basket Washer | Benchmark Machine Tools
JenFab LeanClean 360-1 Comes with Extra Parts (3)Stage Standard Basket Size Unit is in good used condition with extra parts.
2009 BETTER ENGINEERING F3000PZX Cabinet Washer | Benchmark Machine Tools
Better Engineering F3000PZX Parts Washer Stainless (2) Stage
ROTO-FINISH UNKNOWN Rotary Drum Washer | Benchmark Machine Tools
ROTO-FINISH (2) Stage Wash Blow-off S.S. Rotary Drum Parts Washer 18″ Diam. x 3/16″ Perf S/N K R-1020-RD18-96-A8 Used, Condition is very good Unit could be used as a wash and blow off, or a rinse...
--
Max Pressure
--
Motor
--
Max Load Capacity
18.0in
Turntable Diameter
Walsh 18" ROTARY Rotary Drum Washer | Benchmark Machine Tools
Walsh 18” Rotary Drum (2) Stage Washer Cycled, Tested, Ready to ship Cycle tested, and ready to go. S/N FW2943 Single Drum Stainless Steel 18” Drum 18” Drum with 7 Flights, 8-9” apart, 3” Flight...
--
Max Pressure
--
Motor
--
Max Load Capacity
18.0in
Turntable Diameter
2013 MIDBROOK HURRICANE 5020 W/BO MINI Pass-Thru Washer | Benchmark Machine Tools
Model# 5020 W/BO Mini S/N 45256 Manufactured 2013 Hours 33,796 Well maintained, just removed from service.
HANSON 26×36-E-800-B-03-SS Cabinet Washer | Benchmark Machine Tools
Like New Hanson Stainless Steel Parts Washer (4) Stage WRRBO 26″ x 36″
2007 ADF M200 Cabinet Washer | Benchmark Machine Tools
ADF Model 200 Top Load – Stainless Parts Washer 36″ Diam. Table x 18″ Part Height
PROCECO HD62-96-G-5000-2-RD-SS-SC Cabinet Washer | Benchmark Machine Tools
SAVE $$$ Over new, Very hard to find large washer with 100 HP in Stainless Steel!