Filters
Sort By
Very Nice Large Capacity Stainless Steel Parts Washer Still in Plant Under Power, being removed in early May 2022. Originally Built with two parts carriers, only equipped with one.
50.0psi
Max Pressure
210.0hp
Motor
10000.0lb
Max Load Capacity
808070.0in
Turntable Diameter
ADF Model 200 Top Load – Stainless Parts Washer 36″ Diam. Table x 18″ Part Height
Serial No. 15428 Model F-4000 LX-P Specifications: Turntable Diameter 40 Inches Work Height 60 Inches Table Load Capacity 2,000 lbs. Operating Temperature 140-180 Deg. F. Initial Heat Up Time ...
Better Engineering F3000PZX Parts Washer Stainless (2) Stage
Unit is new unused, on customers floor. Ordered for a contract that fell through. Save over 1/2 of new. Four Stage Stainless Steel Spray Washer Reverse Osmosis System Heated Blow-Off System Encl...
Like New Hanson Stainless Steel Parts Washer (4) Stage WRRBO 26″ x 36″
Moel LJ-15WRD 2 Tanks Wash and Rinse/Inhibit, 140 Deg. F. with 160 Dryer Stainless steel construction of Tanks, Drum Enclosure, Dryer. 30 Inch Washer, 18 Inch Rinse, 48 Inch Dryer
--
Max Pressure
1.0hp
Motor
--
Max Load Capacity
--
Turntable Diameter
JenFab LeanClean 360-1 Comes with Extra Parts (3)Stage Standard Basket Size Unit is in good used condition with extra parts.
JRI/Jenfab PCS5060 Stainless Steel Parts Washer Model PCS 5060SS2F Serial No. 12521-23311 New 05/20/2016 Note Stainless on All Wetted Surfaces General Specifications: Table Diameter: 50” Max...
Table Diameter 60" Work Height 75 Inches Table Load Capacity 5,000 lbs. Operating Temperature 140-180 Deg. F. Initial Heat Up Time 45-60 Minutes Voltage: 480 3 Phase 60 HZ,
Just removed from service. Very Good condition (2) Stage Washer Wash Blow-Off Stainless Steel 24" Wide belt 1x1" Mesh, 10" Part Height
Midbrook Hurricane Pass Thru Parts Washer Stainless Steel (2) Stage Wash, Blow-Off
Model# 5020 W/BO Mini S/N 45256 Manufactured 2013 Hours 33,796 Well maintained, just removed from service.
SAVE $$$ Over new, Very hard to find large washer with 100 HP in Stainless Steel!
RAMCO Multi-Tank System MKT16EWRD 3 Stage, 50 lb. Capacity The MKT16 is a compact console designed to provide a complete aqueous wash/rinse/dry degreasing system with a minimum footprint. The syst...
RAMCO Multi-Tank System MKQ16WRRD with Ultrasonics From End User
Stainless Steel Pass-Thru Parts Washer (3) Stage, Wash with filtration, Rinse, Blow-off Just removed from service Manufactured in 2002
ROTO-FINISH (2) Stage Wash Blow-off S.S. Rotary Drum Parts Washer 18″ Diam. x 3/16″ Perf S/N K R-1020-RD18-96-A8 Used, Condition is very good Unit could be used as a wash and blow off, or a rinse...
--
Max Pressure
--
Motor
--
Max Load Capacity
18.0in
Turntable Diameter
Very Nice Low Hour machine just removed from service. Wash, Rinse, Blow-off Electrically heated 3 stage stainless steel conveyor mesh belt washer with insulated tanks. Washer opening is 32"W x 24"...
Model No. OMF-212 S/N 832 Utility Requirements 460 Volt, 3 Phase, 60HZ Materials of Construction: Tanks: 14 Guage 304 Stainless Steel Canopies: 14 Gauge 304 Stainless Steel Frame Under Tank...
Walsh 18” Rotary Drum (2) Stage Washer Cycled, Tested, Ready to ship Cycle tested, and ready to go. S/N FW2943 Single Drum Stainless Steel 18” Drum 18” Drum with 7 Flights, 8-9” apart, 3” Flight...
--
Max Pressure
--
Motor
--
Max Load Capacity
18.0in
Turntable Diameter